AN ISO 9001 : 2008 CERTIFIED CO

Our Product

Wax Injector With Auto Clamp Facility

The injectors are widely used in various applications such as a digital mode for vacuum & pressure, digital temperature controller, built-in tabletop body, excellent working in CAD-CAM modules. These injectors are manufactured using premium quality raw material and modern technology under the supervision of experienced professionals. The quality of these injectors is tested on various parameters before delivering them to the customers.

Specifications
Power Supplier 220V AC
Power Consumption 510w
Size 450 × 310 × 450 MM
Weight 22 Kg Approx.
Temperature 55˚ C
Head 8 mm
Compressor 0.4 - 0.7 MPA, 0.0.2 MPA
Fuse 5 Amps
Wax Capacity About 3 Kg.
Temperature Precision ±0.2˚ C
Temperature Adjusting Range 40 - 99.9˚ C
Setting Time Range For Vacuum 0 - 24.9 Seconds
Setting Time Range For Wax Injection 0 - 24.9 Seconds
Time Range 0 - 99.9 Hours
† Brimful Capacity   †† Under Standard Condition
Benefits
Good filling Vacuuming of the mold before injection ensures good filling for fine filigree and difficult designs.
Accurate temperature control. Wax tank temperature and nozzle temperature are individually controlled so that accurate injection temperature is obtained.
This model has a 99-hour "Heater-ON timer" so you can start injection work at a specific time. It will improve electricity cost and will increase efficiency.
Just place a mold on the clamp unit of the Machine, input digits, and press the START button, then the work cycle (clamp, forward the mold to the nozzle, receive wax, hold it until wax gets hard, and unclamp) will be done automatically.
The rubber mold is always aligned with the injection nozzle of the wax injector by the 'Lateral Flexibility Mechanism' of the Machine.
Send us inquiry
* Required Fields